Suitable for horses that:
-
Are newly backed and sensitive about the bit
-
Fall out through the shoulder in the turn
-
Ignore the outside rein
-
Will not take a metal mouthpiece
-
Slide the bit across the mouth
How it works
Mouthpiece. An unjointed bar at 18mm, the widest bearing surface in the range. With no joint there is nothing to close on the bars, nothing to rise towards the palate and nothing to pinch at the lips, and rein pressure is spread across the full width of the tongue. A stainless steel wire core runs through the whole length, so under contact the bar takes a shallow curve and follows the shape of the tongue rather than bridging across it.
Cheek piece. The full cheek prevents pinching at the sides of the mouth, and the arms above and below the mouthpiece prevent the bit being pulled through and assist in guiding the head, which is why the full cheek remains a schooling standard. The upper arm is bent away from the face so it cannot press into the cheek, and both arms taper to rounded ball ends. Release is slower than a loose ring and light poll pressure is introduced. Fitted with keepers the upper arm is held to the bridle cheekpiece and the bit sits at a constant angle.
Imported
8256
