Suitable for horses that:
-
Have a large tongue and fall out through the shoulder
-
Ignore the outside rein
-
Are newly backed and need both tongue room and a clear steering aid
-
Slide the bit across the mouth
How it works
Mouthpiece. An unjointed mullen bar formed from a single piece of sweet iron, tapering from 14mm at the cheek to 10mm through the centre. The port measures 80mm wide by 10mm high, low and broad rather than tall and narrow, so the tongue is given room across a wide span while the bar stays well clear of the palate. The mouthpiece is swept forward to follow the arch of the tongue. With no joint there is nothing to close on the bars and no nutcracker action, and port relief moves the load off the centre of the tongue and out onto the bars.
Cheek piece. The full cheek prevents pinching at the sides of the mouth, and the arms above and below the mouthpiece prevent the bit being pulled through and assist in guiding the head. The upper arm is bent away from the face so it cannot press into the cheek, and both arms taper to rounded ball ends. Release is slower than a loose ring and light poll pressure is introduced. Fitted with keepers the upper arm is held to the bridle cheekpiece and the bit sits at a constant angle, which matters more on an unjointed mouthpiece because the port needs to stay central over the tongue.
Imported
8237
